FAQs for Reolink E1 Outdoor Pro
What is WiFi 6？What are its benefits？
WiFi 6 (802.11ax Protocol) is the newest standard of WiFi technology, known for its faster and more stable wireless connectivity with reduced network latency. It also applied advanced encryption protocol WPA3 to enhance the security of wireless network.
Can this camera connect to non-WiFi 6 routers?
Yes, this camera can connect to non-WiFi 6 routers, but a WiFi 6 router is better recommended for enhanced networking.
Can this camera support time-lapse function?
Yes, the camera can support time-lapse. It can save time-lapse photos and videos to the SD card.
Yes, this camera supports person/vehicle detection. It also support pet detection.
Yes, currently, this camera can work with Google Assistant.
The camera can be powered by a 12V 1A DC power adapter (A 1.2-meter power adaptor and a 4.5m extension cable are shipped with the camera). You can check what is in the box at the end of the overview page.
This camera supports up to 256GB micro SD cards with FAT32 format and Class 10 read & write speed.
Yes, Reolink WiFi cameras can be connected to Reolink PoE NVR in an indirect way. You can follow these steps to connect them:
Step 1: Connect the camera to a wifi router via wifi signals or an ethernet cable, and it needs to be powered via a power adapter.
Step 2: Connect the NVR to the same router by a network cable.
The NVR will pick up all the cameras on the same network.
Yes, you can turn off the spotlights manually.
By default, the camera's spotlights are motion activated: it will turn on automatically when a motion is detected. You can turn them off or adjust the brightness to your liking.
Please note that with the spotlights on you can enjoy clear color night vision, but if the spotlights are turned off, you will only see black and white images at night.
Yes, the camera supports NAS.
The RTSP and other ports may be disabled by default. You can launch Reolink Client, then go to Device Settings >> Network >> Advanced >> Port Settings to make sure all ports are enabled before using 3rd party softwares.