FAQs
FAQs for Anker SOLIX Bifacial PS200
Setting Up Your Solar Generator
- Find the PV ports behind your solar panel.
- Use an extension cable to connect the PV ports to the PV connector-to-XT60 (or XT60i) solar charging converter.
Note: Connect cables to their opposing charge, excluding the XT-60 (or XT-60i) port.
- Connect the solar charging cable converter to your power station's XT60 (or XT60i) port.
Is Anker SOLIX PS200 Bifacial Portable Solar Panel waterproof?
Yes, PS200 is rated IP68 water-resistant, providing reliable protection against water splashes. However, please avoid exposing it to heavy rain or submerging it in water.
Why doesn't Anker SOLIX PS200 Bifacial Portable Solar Panel reach the rated power shown in the specifications?
Solar panel output varies with sunlight intensity, panel orientation, and angle. Due to varying conditions, actual power may be lower than rated. For best results, test your panel under full, on obstructed sunlight.
How do I clean Anker SOLIX PS200 Bifacial Portable Solar Panel?
Use a soft cloth to remove dust and dirt from the surface. Then wipe the solar module with a damp cloth to clear any residue, and promptly remove debris of heavy dirt to maintain optimal performance.
Why does Anker SOLIX PS200 Bifacial Portable Solar Panel only have one fixed angle?
Based on our calculations, a 35° tilt optimizes power generation from 10 AM to 5 PM in Japan, the U.S., and Europe. However, the panel's bracket allows slight adjustments if needed.
What precautions should I take when using Anker SOLIX PS200 Bifacial Portable Solar Panel?
The black metal frame may heat up after prolonged exposure to sunlight. Avoid touching it directly and wear protective gloves when adjusting or moving the panel to prevent burns.
Featured collection
