Description
Technical Specs for eufy Robot Lawn Mower Omni E15
Recommended Mowing Area (Size)
|
800m2 (0.2 Acre) |
Cutting Width |
203 mm
|
Cutting Height | 25-75 mm |
Maximum Slope | 40% (18 °) |
Noise Level | 56 dB |
Charging Time |
90 to 110 min |
Waterproof Level | IPX6 |
Dimensions |
Mower: 60.3 x 39.4 x 31.8 cm |
FAQs for eufy Robot Lawn Mower Omni E15
2. Grass Height: Keep grass under 9 cm (3.5 in).
3. Types of Grass: We don't recommend using this product to cut Zoysia or St. Augustine grass.
4. Slope Check: Ensure slopes are ≤18 degrees; set No-Go Zones for steeper areas.
5. Clear Obstacles: Remove stones and debris, and fill in any holes or uneven ground.
6. Wi-Fi Setup: Use a mobile hotspot for initial setup if Wi-Fi coverage is limited. After setup, enable 4G to ensure stable connectivity.
7. Set No-Go Zones: Mark areas where the mower could get stuck, like pipes or sprinkler heads, and areas not fully covered with grass. Allow low stepping stones.
2. Map Limit: Each base station supports one map. For more maps, contact eufy support to order additional base stations.
3. Installation: Secure the base station using nails for lawns or glue for hard surfaces.
4. Return Mower to Base: Press "Return" and then "OK".
2. Optimize Edge Cutting: Adjust Danger Zone Detection settings for closer cutting. This may increase mower hazards.
3. Trimming Near Walls: Grass within 10 cm (4 in) of walls may require manual trimming.
4. Boundary Grass: Trim grass taller than 9 cm (3.5 in) before mowing.
2. Cutting Height: Gradually lower blade height for tall grass.
3. Multi-Zone Pathway: Set up a Multi-Zone Pathway if the distance between lawns is ≤60 m.
4. No-Go Zones: Mark areas where the mower could get stuck.
5. Boundary Setup: For unclear divisions with neighbours, use physical barriers or set virtual walls after mapping.
2. Resume Mowing: Automatically resumes unfinished tasks after charging.
3. Base Station Placement: Keep the charging cable 30 cm (12 in) above ground to prevent water damage.
4. Software Updates: Regularly update firmware.
Shipping: All orders are shipped from within the Republic of Ireland with free delivery on orders over €100. €5.99 for order under €100.
Packages are generally dispatched the next day after receipt of payment and are shipped via An Post Express postage. We now also ship to Northern Ireland for a fee of €9.99 and mainland UK for a fee of €14.99.
Delivery Time - Ireland:
Please allow 1-3 working days for delivery within Ireland but generally* you will receive next day if the order is placed before 3pm Monday to Thursday.
*Not guaranteed.
Delivery Time - UK:
Please allow up to 5-7 working days for delivery to the UK.
Returns: We operate a 14 day change of mind refund policy provided goods are returned unused, in original packaging, in original condition and accompanied by proof of purchase. It is our policy to return goods to the purchaser if we suspect that any product has been used.
See full returns and faulty policy here.
Prior to returning any goods, please contact our Online Team at info@connectit.ie who will guide you through our returns process.